Part Number Hot Search : 
UNR5115R C68HC908 LP3311S SI4784 RFP30N06 NCP304A ANALOG BF721
Product Description
Full Text Search
 

To Download EM6D100L Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 05238
EM6D-100L
Only One Name Means ProT ek'TionTM
EMI FIL TER/TVS ARRA Y
APPLICA TIONS Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns FEA TURES ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters > 25db Attenuation from 800MHz to 3GHz Protects Up to Six(6) Data Lines RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS DFN-12 Package Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245C Pure-Tin - Sn, 100: 260-270C Flammability rating UL 94V-0 Device Marking: Marking Code 8mm Tape and Reel Per EIA Standard 481 DFN-12
PIN CONFIGURA TION
For Each Line
I/On 100 Ohm I/On
1
2
3
4
5
6
GND
10pF GND 10pF
12 11 10
Note: I/O connected from pins 1-12, 2-11, 3-10, 4-9, 5-8 and 6-7.
9
8
7
BOTTOM VIEW
05238.R3 1/06
1
www.protekdevices.com
EM6D-100L
DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified
PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 20% Soldering Temperature for 10 seconds SYMBOL TJ TSTG P R TL VALUE -40C to 85C -55C to 150C 400 100 265C UNITS C C mW OHMS C
ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified
PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CUT-OFF FREQUENCY CAPACITANCE PER LINE (50 OHMS I/O) (See Note 1) ZERO BIAS
VWM VOLTS EM6D-100L M6D 10L 5.0
@ 1mA V(BR) VOLTS 6.0
@ 3V ID A 0.1
@10mA VF VOLTS 0.8
@ 800-3000 MHz dB 25
fc MHz 150
@2.5V, 1MHz C pF 20
Note 1: 32pF @ 0V, 1MHz, 20% tolerance.
FIGURE 1 INSERTION LOSS
0 -5 -10
Gain (dB)
-15 -20 -25 -30 -35 0.1 1 10 100
2.5 Volts
0 Volts
1000
10000
Frequency (MHz)
05238.R3 1/06
2
www.protekdevices.com
EM6D-100L
GRAPHS
FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C)
1.100
Normalized Resistance
1.060
1.020
0.980
0.940
0.900 -40 -20 0 20 40 Temperature C 60 80 100
1.6
Cj - Capacitance (Normalized)
FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C)
1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6
VR - Reverse Voltage - Volts
FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter)
35
5 Volts per Division
25
15
5
-5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform)
05238.R3 1/06
3
www.protekdevices.com
EM6D-100L
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
D
PACKAGE DIMENSIONS
MILLIMETERS DIM A A1 A3 b D E E2 E3 E4 e L MIN 0.77 0.00 0.178 0.20 2.95 1.35 0.30 1.98 2.08 0.46 0.20 MAX 0.84 0.05 0.228 0.30 3.10 1.45 0.40 2.24 2.34 0.56 0.28 INCHES MIN 0.030 0.00 0.007 0.008 0.116 0.053 0.012 0.078 0.082 0.018 0.008 MAX 0.033 0.002 0.009 0.012 0.122 0.057 0.016 0.088 0.092 0.022 0.011
E Pin 1 Reference TOP VIEW A3 A SIDE VIEW A3
NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals.
A1
TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reel - 5,000 pieces per 8mm tape, i.e., EM6D-100L-T7. 3. Suffix-T13 = 13 Inch Reel - 15,000 pieces per 8mm tape, i.e., EM6D-100L-T13. 4. Suffix- LF = Lead-Free, Pure Tin Plating, i.e., EM6D-100L-LF-T7.
L 1
e 6 E3 E4 12 b BOTTOM VIEW 7 E2
Outline & Dimensions: Rev 1 - 9/05, 06058
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia. 178mm (7")/330mm(13") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25
1.60 0.10 3.25 0.10 0.95 0.10 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10
P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2
E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot
F
W
P
User Direction of Feed
COPYRIGHT (c) ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products.
ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com
05238.R3 1/06
4
www.protekdevices.com


▲Up To Search▲   

 
Price & Availability of EM6D100L

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X